View NCV5662_1119505.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NCP5662, NCV5662 Low Output Voltage, Ultra-Fast 2.0 A Low Dropout Linear Regulator with Enable
The NCP5662/NCV5662 is a high performance, low dropout linear regulator designed for high power applications that require up to 2.0 A current. It is offered in both fixed and adjustable output versions. With output voltages as low as 0.9 V and ultra-fast response times for load transients, the NCP5662/NCV5662 also provides additional features such as Enable and Error Flag (for the fixed output version), increasing the utility of these devices. A thermally robust, 5 pin D2PAK or DFN8 package, combined with an architecture that offers low ground current (independent of load), provides for a superior high-current LDO solution.
Features http://onsemi.com MARKING DIAGRAMS
1 5 D2PAK DS SUFFIX CASE 936AA
NC x5662DSy AWLYWWG
* * * * * * * * * * * * * * * * * *
Ultra-Fast Transient Response (Settling Time: 1-3 ms) Low Noise Without Bypass Capacitor (26 mVrms) Low Ground Current Independent of Load (3.0 mA Maximum) Fixed/Adjustable Output Voltage Versions Enable Function Error Flag (Fixed Output Version) Current Limit Protection Thermal Protection 0.9 V Reference Voltage for Ultra-Low Output Operation Power Supply Rejection Ratio > 65 dB NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes These are Pb-Free Devices Servers ASIC Power Supplies Post Regulation for Power Supplies Constant Current Source Networking Equipment Gaming and STB Modules
1
1 DFN8 CASE 488AF x y
NCP5 662y ALYW G G
Applications
= P or V = A for Adjustable Version B for Fixed 1.5 V Version C for Fixed 3.3 V Version D for Fixed 1.2 V Version E for Fixed 1.8 V Version F for Fixed 2.5 V Version G for Fixed 2.8 V Version H for Fixed 3.0 V Version A = Assembly Location L = Wafer Lot Y = Year WW = Work Week G or G = Pb-Free Package (Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 12 of this data sheet.
(c) Semiconductor Components Industries, LLC, 2007
1
January, 2007 - Rev. 7
Publication Order Number: NCP5662/D
NCP5662, NCV5662
PIN FUNCTION DESCRIPTION
Pin Adj/Fixed D2PAK 1 2 3, TAB 4 5 5 - Pin Adj/Fixed DFN8 4 6 1, 2, 3, EP 7 8 8 5
Pin Name Enable Vin Ground Vout Adj (Adjustable Version) Error Flag (Fixed Version) N/C
Description This pin allows for on/off control of the regulator. To disable the device, connect to Ground. If this function is not in use, connect to Vin. Positive Power Supply Input Voltage Power Supply Ground Regulated Output Voltage This pin is connected to the resistor divider network and programs the output voltage. An Error Flag is triggered when the output voltage is out of regulation excluding transient signals that may occur. Requires a pullup resistor f 100 kW. No connection. True no connect. PCB runs allowable
ABSOLUTE MAXIMUM RATINGS
Rating Input Voltage Output Pin Voltage Adjust Pin Voltage Enable Pin Voltage Error Flag Voltage Error Flag Current Thermal Characteristics, (Note 1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Thermal Characteristics, DFN8 (Note 1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Lead (Note 2) Operating Junction Temperature Range Storage Temperature Range D2PAK Symbol Vin Vout Vadj Ven Vef Ief RqJA RqJC RqJA RqJC TJ Tstg Value 18 -0.3 to Vin +0.3 -0.3 to Vin +0.3 -0.3 to Vin +0.3 -0.3 to Vin +0.3 3.0 45 5.0 C/W 78 14 -40 to +150 -55 to +150 C C Unit V V V V V mA C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. NOTE: This device series contains ESD protection and exceeds the following tests: Human Body Model (HBM) JESD 22-A114-B Machine Model (MM) JESD 22-A115-A. The maximum package power dissipation is: T *T J(max) A P+ D R The bipolar process employed for this IC is fully characterized and rated for reliable 18 V VCCmax operation. To avoid damaging the part or degrading it's reliability, power dissipation transients should be limited to under 30 W for D2PAK. For open-circuit to short-circuit transient, PDTransient = VCCmax * ISC. 1. 1 oz copper, 1 in2 copper area. 2. Lead 6.
qJA
http://onsemi.com
2
NCP5662, NCV5662
ELECTRICAL CHARACTERISTICS
(Vin - Vout = 1.5 V, for typical values TJ = 25C, for min/max values TJ = -40C to 85C, Cin = Cout = 150 mF unless otherwise noted.) Characteristic ADJUSTABLE OUTPUT VERSION Input Voltage Output Noise Voltage Output Voltage Accuracy TJ = 25C (Vin = Vout +1.5 V to 7.0 V, Iout = 10 mA to 2.0 A) TJ = -20 to +125C (Vin = Vout +1.5 V to 7.0 V, Iout = 10 mA to 2.0 A) TJ = -40 to +150C (Vin = Vout +1.5 V to 7.0 V, Iout = 10 mA to 2.0 A) Adjustable Pin Input Current Line Regulation (Iout = 10 mA, Vout+1.5 V < Vin < 7.0 V) Load Regulation (10 mA < Iout < 2.0 A) Dropout Voltage (Iout = 2.0 A) Peak Output Current Limit Internal Current Limitation Ripple Rejection (120 Hz) Ripple Rejection (1 kHz) Thermal Shutdown (Guaranteed by Design) Ground Current Iout = 2.0 A Disabled State Enable Input Threshold Voltage Voltage Increasing, On state, Logic High Voltage Decreasing, Off state, Logic Low Enable Input Current Enable Pin Voltage = 0.3 Vmax Enable Pin Voltage = 1.3 Vmin Ien - - 0.5 0.5 - - mA Iq Iqds Ven 1.3 - - - - 0.3 - - 1.3 10 3.0 300 mA mA V Vin Vn Vout -1% -1.5% -2% Iadj REGline REGload VDO Iout Ilim RR TSHD - - - - 2.0 - - - - - 0.9 - 40 0.03 0.03 1.0 - 3.0 70 65 160 +1% +1.5% +2% - - - 1.3 - - - - - nA % % V A A dB C 2.0 - - 26 9.0 - V mVrms V Symbol Min Typ Max Unit
http://onsemi.com
3
NCP5662, NCV5662
ELECTRICAL CHARACTERISTICS
(Vin - Vout = 1.5 V, for typical values TJ = 25C, for min/max values TJ = -40C to 85C, Cin = Cout = 150 mF unless otherwise noted.) Characteristic FIXED OUTPUT VOLTAGE Input Voltage Output Noise Voltage (Vout = 0.9 V) Output Voltage Accuracy (Note 3) TJ = 25C (Vin = Vout +1.5 V to 7.0 V, Iout = 10 mA to 2.0 A) TJ = -20 to +125C (Vin = Vout +1.5 V to 7.0 V, Iout = 10 mA to 2.0 A) TJ = -40 to +150C (Vin = Vout +1.5 V to 7.0 V, Iout = 10 mA to 2.0 A) Line Regulation (Iout = 10 mA, Vout+1.5 V < Vin < 7.0 V) Load Regulation (10 mA < Iout < 2.0 A) Dropout Voltage (Iout = 2.0 A) Peak Output Current Limit Internal Current Limitation Ripple Rejection (120 Hz) Ripple Rejection (1 kHz) Thermal Shutdown (Guaranteed by Design) Ground Current Iout = 2.0 A Disabled State Enable Input Threshold Voltage Voltage Increasing, On state, Logic High Voltage Decreasing, Off state, Logic Low Enable Input Current Enable Pin Voltage = 0.3 Vmax Enable Pin Voltage = 1.3 Vmin Error Flag (Fixed Output) Error Flag Output Low Voltage Saturation (Ief = 1.0 mA) Error Flag Leakage Error Flag Blanking Time (Note 4) 3. Fixed output voltage available at 0.9 V per request. 4. Can be disabled per customer request. Vcflt Vcfdo Iefleak Tef Ien - - 91 - - - 0.5 0.5 94 200 1.0 50 - - 97 - - - mA % of Vout mV mA ms Iq Iqds Ven 1.3 - - - - 0.3 - - 1.3 30 3.0 300 mA mA V Vin Vn Vout -1% -1.5% -2% REGline REGload VDO Iout Ilim RR TSHD - - - 2.0 - - - - - Vout - 0.03 0.2 1.0 - 3.0 70 65 160 +1% +1.5% +2% - - 1.3 - - - - - % % V A A dB C 2.0 - - 26 9.0 - V mVrms V Symbol Min Typ Max Unit
http://onsemi.com
4
NCP5662, NCV5662
Vin IN
ON Voltage Reference Block R3 Enable Block Vref = 0.9 V Output Stage EN OFF Vout
Cin
R1 R4 ADJ Cout R2
GND
R1 + R2
Vout *1 Vref
GND
Figure 1. Typical Schematic, Adjustable Output Version
Vin IN
ON Voltage Reference Block R3 Enable Block Vref = 0.9 V Output Stage R1 R4 Cout EN OFF Vout Cc Rflag
Cin
R2 Error Flag
EF
GND
GND
Figure 2. Typical Schematic, Fixed Output Version
http://onsemi.com
5
NCP5662, NCV5662
1.2 VDO, DROPOUT VOLTAGE (V) 1.0 0.8 0.6 0.4 0.2 0 -50
-25
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (C)
Figure 3. Dropout Voltage vs. Temperature
1.3 VDO, DROPOUT VOLTAGE (V) 1.2 1.1 1.0 0.9 0.8 0.7 VDO, DROPOUT VOLTAGE (V) Vout = 1.5 V Fixed Cin = 150 mF Cout = 10 to 150 mF TJ = 25C
1.3 1.2 1.1 1.0 0.9 0.8 0.7 0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0 Iout, OUTPUT CURRENT (A) Iout, OUTPUT CURRENT (A) Vout = 3.3 V Fixed Cin = 150 mF Cout = 10 to 150 mF TJ = 25C
Figure 4. 1.5 V Dropout Voltage vs. Output Current
Figure 5. 3.3 V Dropout Voltage vs. Output Current
3.5 IGND, GROUND CURRENT (mA) 3.0 2.5 2.0 1.5 1.0 0.5 0 -50 ISC, SHORT CIRCUIT LIMIT (A)
3.5 3.25 3 2.75 2.5 2.25 2 -50
-25
0
25
50
75
100
125
150
-25
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (C)
TJ, JUNCTION TEMPERATURE (C)
Figure 6. Ground Current vs. Temperature
Figure 7. Short Circuit Current Limit vs. Temperature
http://onsemi.com
6
NCP5662, NCV5662
1.6 Vout, OUTPUT VOLTAGE (V) Vout, OUTPUT VOLTAGE (V) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1.0 Iout = 10 mA Cin = 150 mF Cout = 1.0 to 150 mF TJ = 25C 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 3.4 3.0 2.6 2.2 1.8 1.4 1.0 0.6 0.2 0 0 1.0 2.0 3.0 4.0 Iout = 10 mA Cin = 150 mF Cout = 1.0 to 150 mF TJ = 25C 5.0 6.0 7.0 8.0 9.0
Vin, INPUT VOLTAGE (V)
Vin, INPUT VOLTAGE (V)
Figure 8. 1.5 V Output Voltage vs. Input Voltage
Figure 9. 3.3 V Output Voltage vs. Input Voltage
1.55 Vout, OUTPUT VOLTAGE (V) Vout, OUTPUT VOLTAGE (V) Vin = 3.3 V Iout = 2.0 A maximum Cin = 150 mF Cout = 1.0 to 150 mF TJ = 25C
3.35 3.34 3.33 3.32 3.31 3.30 3.29 3.28 3.27 3.26 3.25 0 0.5 1.0 1.5 2.0 0 0.5 1.0 1.5 2.0 Iout, OUTPUT CURRENT (A) Iout, OUTPUT CURRENT (A) Vin = 5.1 V Iout = 2.0 A maximum Cin = 150 mF Cout = 1.0 to 150 mF TJ = 25C
1.53
1.51
1.49
1.47
1.45
Figure 10. 1.5 V Output Voltage vs. Output Load Current
Figure 11. 3.3 V Output Voltage vs. Output Load Current
1.2 RR, RIPPLE REJECTION (dB) 1.0 OUTPUT CURRENT (A) 0.8 0.6 0.4 0.2 0.0 0 2 4 6 8 10 12 14 16 20 INPUT-OUTPUT VOLTAGE DIFFERENTIAL (V) TA = 25C L = 25 mm Copper
100 90 80 70 60 50 40 30 20 10 0 0
Vin = 4.0 V Vout = 0.9 V Cin = 0 mF Cout = 1.0 mF TJ = 25C Iout = 1.0 A Iout = 10 mA
1.0
10 100 F, FREQUENCY (kHz)
1000
Figure 12. Output Current vs. Input-Output Voltage Differential
Figure 13. Ripple Rejection vs. Frequency
http://onsemi.com
7
NCP5662, NCV5662
100
Hz) Hz) NOISE DENSITY (nVrms/ Vin = 12 V Vout = 0.9 V Iout = 10 mA Cin = 150 mF Cout = 150 mF TJ = 25C
100 90 80 70 60 50 40 30 20 10 0 Stop 100 kHz
F, FREQUENCY (kHz) Vin = 3.3 V Vout = 0.9 V Iout = 2.36 A Cin = 150 mF Cout = 150 mF TJ = 25C
90 80 70 60 50 40 30 20 10 0
NOISE DENSITY (nVrms/
Start 1.0 kHz
Start 1.0 kHz
F, FREQUENCY (kHz)
Stop 100 kHz
Figure 14. Noise Density vs. Frequency
Figure 15. Noise Density vs. Frequency
http://onsemi.com
8
NCP5662, NCV5662
Vin = 3.3 V Vout = 1.5 V Fixed Cin = 150 mF Cout = 150 mF TA = 25C
Vout 20 mV/Div
Iout 1.0 A/Div
Iout 1.0 A/Div Iout = 2.0 A to 10 mA TIME (1.0 ms/Div) TIME (1.0 ms/Div)
Vin = 3.3 V Vout = 1.5 V Fixed Cin = 150 mF Cout = 150 mF TA = 25C Iout = 10 mA to 2.0 A
Figure 16. Load Transient Response
Vout 50 mV/Div
Figure 17. Load Transient Response
Vin = 3.3 V Vout = 1.5 V Fixed Cin = 150 mF Cout = 150 mF TA = 25C
Vout 20 mV/Div
Iout 1.0 A/Div
Iout 1.0 A/Div Iout = 2.0 A to 10 mA TIME (100 ns/Div) TIME (100 ns/Div)
Vin = 3.3 V Vout = 1.5 V Fixed Cin = 150 mF Cout = 150 mF TA = 25C Iout = 10 mA to 2.0 A
Figure 18. Load Transient Response
Vout 50 mV/Div
Figure 19. Load Transient Response
Vout 20 mV/Div
Iout 1.0 A/Div
Iout = 10 mA to 2.0 A TIME (200 ns/Div)
Vin = 4.0 V Vout = 0.9 V Cin = 150 mF Cout = 10 mF TA = 25C
Iout 1.0 A/Div
Vout 50 mV/Div
Vin = 4.0 V Vout = 0.9 V Cin = 150 mF Cout = 10 mF TA = 25C
Iout = 2.0 A to 10 mA TIME (200 ns/Div)
Figure 20. Load Transient Response
Figure 21. Load Transient Response
http://onsemi.com
9
NCP5662, NCV5662
APPLICATION INFORMATION The NCP5662 is a high performance low dropout 2.0 A linear regulator suitable for high power applications, featuring an ultra-fast response time and low noise without a bypass capacitor. It is offered in both fixed and adjustable output versions with voltages as low as 0.9 V. Additional features, such as Enable and Error Flag (fixed output version) increase the utility of the NCP5662. It is thermally robust and includes the safety features necessary during a fault condition, which provide for an attractive high current LDO solution for server, ASIC power supplies, networking equipment applications, and many others.
Input Capacitor
capacitor close to the output pin and keep the leads short. This should help ensure ultra-fast transient response times.
Adjustable Output Operation
The application circuit for the adjustable output version is shown in Figure 1. The reference voltage is 0.9 V and the adjustable pin current is typically 40 nA. A resistor divider network, R1 and R2, is calculated using the following formula:
R1 + R2 Current Limit Operation Vout *1 Vref
The recommended input capacitor value is a 150 mF OSCON with an Equivalent Series Resistance (ESR) of 50 mW. It is especially required if the power source is located more than a few inches from the NCP5662. This capacitor will reduce device sensitivity and enhance the output transient response time. The PCB layout is very important and in order to obtain the optimal solution, the Vin and GND traces should be sufficiently wide to minimize noise and unstable operation.
Output Capacitor
As the peak output current increases beyond its limitation, the device is internally clampled to 3.0 A, thus causing the output voltage to decrease and go out of regulation. This allows the device never to exceed the maximum power dissipation.
Error Flag Operation
Proper output capacitor selection is required to maintain stability. The NCP5662 is guaranteed to be stable at an output capacitance of, Cout > 10 mF with an ESR < 300 mW over the output current range of 10 mA to 2.0 A. For PCB layout considerations, place the recommended ceramic
390 340 290 qJA (C/W) 240 190 140 90 40 0 100 200 300 1 oz Copper 2 oz Copper
The Error Flag pin on the NCP5662 will produce a logic Low when it drops below the nominal output voltage. Refer to the electrical characteristics for the threshold values at which point the Error Flag goes Low. When the NCP5662 is above the nominal output voltage, the Error Flag will remain at logic High. The external pullup resistor needs to be connected between Vin and the Error Flag pin. A resistor of approximately 100 kW is recommended to minimize the current consumption. No pullup resistor is required if the Error Flag output is not being used.
400
500
600
700
COPPER AREA
(mm2)
Figure 22. DFN8 Thermal Resistance vs. Copper Area
http://onsemi.com
10
NCP5662, NCV5662
NCP5662 Evaluation Board
Figure 23. Test Board used for Evaluation
http://onsemi.com
11
NCP5662, NCV5662
ORDERING INFORMATION
Device NCP5662DSADJR4G NCP5662DS12R4G NCP5662DS15R4G NCP5662DS18R4G NCP5662DS25R4G NCP5662DS28R4G NCP5662DS30R4G NCP5662DS33R4G NCV5662DSADJR4G NCV5662DS15R4G NCP5662MNADJR2G NCP5662MN15R2G NCP5662MN33R2G Nominal Output Voltage Adj (Pb-Free) Fixed, 1.2 V (Pb-Free) Fixed, 1.5 V (Pb-Free) Fixed, 1.8 V (Pb-Free) Fixed, 2.5 V (Pb-Free) Fixed, 2.8 V (Pb-Free) Fixed, 3.0 V (Pb-Free) Fixed, 3.3 V (Pb-Free) Adj (Pb-Free) Fixed, 1.5 V (Pb-Free) Adj (Pb-Free) Fixed, 1.5 V (Pb-Free) Fixed, 3.3 V (Pb-Free) DFN8 3000/Tape & Reel D2PAK 800/Tape & Reel Package Shipping
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
12
NCP5662, NCV5662
PACKAGE DIMENSIONS
D2PAK 5-LEAD CASE 936AA-01 ISSUE B
A E K S B 12345 H W M L P G D 5 PL R -A- N
DIM A B C D E G H K L M N P R S U U1 V V1 W
U U1 V1 V
NOTES: 1. DIMENSIONS AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. PACKAGE OUTLINE EXCLUSIVE OF MOLD FLASH AND METAL BURR. 4. PACKAGE OUTLINE EXCLUSIVE OF PLATING THICKNESS. 5. FOOT LENGTH MEASURED AT INTERCEPT POINT BETWEEN DATUM A AND LEAD SURFACE. INCHES MIN MAX 0.396 0.406 0.330 0.340 0.170 0.180 0.026 0.035 0.045 0.055 0.067 BSC 0.539 0.579 0.055 0.066 0.000 0.010 0.098 0.108 0.017 0.023 0.058 0.078 0_ 8_ 0.095 0.105 0.296 0.304 0.265 0.272 0.296 0.300 0.040 0.044 0.010 MILLIMETERS MIN MAX 10.05 10.31 8.38 8.64 4.31 4.57 0.66 0.91 1.14 1.40 1.70 BSC 13.69 14.71 1.40 1.68 0.00 0.25 2.49 2.74 0.43 0.58 1.47 1.98 0_ 8_ 2.41 2.67 7.52 7.72 6.72 6.92 7.53 7.63 1.01 1.11 0.25
C
SOLDERING FOOTPRINT*
8.38 0.33 1.702 0.067 10.66 0.42 1.016 0.04
3.05 0.12 16.02 0.63
SCALE 3:1
mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
13
NCP5662, NCV5662
8 PIN DFN, 4x4 CASE 488AF-01 ISSUE B
D
PIN ONE IDENTIFICATION
A
8X
L
1
B
8X
K
8
E
2X
D2
NOTES: 1. DIMENSIONS AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. MILLIMETERS MIN MAX 0.80 1.00 0.00 0.05 0.20 REF 0.25 0.35 4.00 BSC 1.91 2.21 4.00 BSC 2.09 2.39 0.80 BSC 0.20 --- 0.30 0.50
0.15 C b
2X 8X NOTE 3
5
0.15 C
TOP VIEW
0.10 C A B 0.05 C
BOTTOM VIEW
0.10 C A
8X
0.08 C
SEATING PLANE
A1
(A3) C
SIDE VIEW
SOLDERING FOOTPRINT*
4.30 2.21
8X
1
8X
0.35
DIMENSIONS: MILLIMETERS
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
The products described herein (NCP5662/NCV5662), may be covered by one or more of the following U.S. patents: 5,920,184; 5,834,926. There may be other patents pending.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
14
CC CC CC CC CC CC
CC C CC C CC C CC C
4
E2
e
DIM A A1 A3 b D D2 E E2 e K L
CC CC CC CC CC CC
CCC C
2.39
0.63
0.40 0.80 PITCH
2.75
NCP5662/D

▲Up To Search▲

Price & Availability of NCV5662

	To Download NCV5662 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .